Development & Transmission

To develop an IoT cloud base Smart Jacket system

Implementing devices

As shown in figure the electrodes are placed on chest there are three electrodes are placed on body out of which one is placed in left hand and other two are placed on the chest of human body. The temperature and humidity sensor is placed below the electrodes that sensor is suitable for capturing human temperature. 

All Sensors on body

While the pulse rate and oxidation level sensor is placed on the the right hand side of the body. Small LCD is also placed in a smart jacket pocket in which offline temperature and humidity of the human body is Shown directly.  

Transmitting Data to IoT cloud

As already discussed firstly the smart jacket which consists of all sensors and sensors transmit the data with the help of controller to the IoT cloud. 

Transmitting Methodology

Receiving Data on IoT cloud

As shown in figure ECG data is received from IoT cloud. This data of ECG signal is recorded in a real time. After reaching the log values in IoT cloud it starts updating the log values continuously. It depends upon server that how many time it will take for updating the values.

ECG Data

 

 

Body Temp.,  Ambient Temp. & Humidity

We also find body temperature of the human body.  Body temperature is received from IoT cloud. As shown in given figure the body temperature is calculated 33 degree Celsius. Which is a normal body temperature.

Ambient Temp.

Ambient temperature is also known as the surrounding temperature. We also find the ambient temperature. Generally room temperature 24 degree celsius is known as the normal temperature issue in the given figure we recorded 21 degree celsius temperature. We also calculate the value of humidity the value of humidity is recorded 85.

Body and Ambient Temperature

Pulse Rate & Oxidation Level 

The result of pulse rate is also obtained. The pulse rate recorded at 87 beats in 1 minute. Which is a normal case. This pulse rate can be watch in real-time on IoT cloud. 

Oxidation of the human body is also recorded. As shown in given figure, the value of oxidation is 93. Which is a normal case. This oxidation value can be watch in a real-time on IoT cloud.

Humidity Value and Oxidation Level

 

To develop a feedback mechanism to revert a alert response to mobile  phones 

Setting up Alert Feedback Mechanism 

With the help of above, After receiving the data. The Alert feedback is set. On the iot cloud the threshold limit is set for few sensors. Threshold limit for the temperature sensor is 37 degree celsius is a set on IoT cloud. Because 37 degrees celsius is a condition when human feels if fever in his body. So with the help of the smart jacket it is also capable to detect the fever and sending the alert message to the doctor when the patient it has a fever. For the pulse rate and oxidation level is threshold value is also set for the both sensors.

Alert Feedback

Alert Feedback Mechanism

When the body temperature will go above 37 degree calcius, then doctor will receive the SMS and email into his mobile phone

Message received by doctor

Jacket Overview

Jacket Overview